Product details

This series machine is suitable of the ferrous, nonferrous metal and some kinds of nonmetal materials with hard alloy, high capacity and high speed steel tools. It can perform finely and roughly turning cylinder and inner hole, inner and outer taper, surface, grooving, drilling, tapping and reaming.

Main Technical specification

Name	Value
Max. turning diameter (mm)	2500
Max. working height (mm)	1600
Max. weight of workpiece (t)	10
Table diameter (mm)	2250
Speed range of table (r/min)	2~63, 16 steps
Max. torque of table (KN.m)	63
Max. cutting resistance of right tool post (KN)	35
Max. cutting resistance of left tool post (KN)	30
Total cutting resistance (KN)	63
Travel of tool post (Horizontal) (mm)	1400
Travel of tool post (Vertical) (mm)	1000
Feed range and speed-step of tool post (mm/min)	0.25-90, 18 steps
Rapid moving speed of tool post (mm/min)	1560
Crossbeam fluctuation travel (mm)	1250
Crossbeam fluctuation speed (mm/min)	350
Moving degrees limit of tool post (°)	±30
Tool posts	1 position ram
Cutting section of the tool bar (mm)	40×50
Crossbeam fluctuation motor power (AC) (kw)	7.5
Cutting feed two-speed motor power of left feeding-box (AC) (KW)	1.3/1.8
Fast motor power (KW)	2.2
Power of main motor (AC) (KW)	55
Weight of machine (t)	34
Machine overall dimension (mm)	518045604680
Power supply	380V/50HZ/3PH
Electrical components	Schneider electrics
PLC controller	Mitsubishi