Product name: Conventional double column vertical lathe CX5225
Product code: WG1608
Added time: 2018-01-22
Views: 3443
This series machine is suitable of the ferrous, nonferrous metal and some kinds of nonmetal materials with hard alloy, high capacity and high speed steel tools. It can perform finely and roughly turning cylinder and inner hole, inner and outer taper, surface, grooving, drilling, tapping and reaming.
Main Technical specification
Name |
Value |
Max. turning diameter (mm) |
2500 |
Max. working height (mm) |
1600 |
Max. weight of workpiece (t) |
10 |
Table diameter (mm) |
2250 |
Speed range of table (r/min) |
2~63, 16 steps |
Max. torque of table (KN.m) |
63 |
Max. cutting resistance of right tool post (KN) |
35 |
Max. cutting resistance of left tool post (KN) |
30 |
Total cutting resistance (KN) |
63 |
Travel of tool post (Horizontal) (mm) |
1400 |
Travel of tool post (Vertical) (mm) |
1000 |
Feed range and speed-step of tool post (mm/min) |
0.25-90, 18 steps |
Rapid moving speed of tool post (mm/min) |
1560 |
Crossbeam fluctuation travel (mm) |
1250 |
Crossbeam fluctuation speed (mm/min) |
350 |
Moving degrees limit of tool post (°) |
±30 |
Tool posts |
1 position ram |
Cutting section of the tool bar (mm) |
40×50 |
Crossbeam fluctuation motor power (AC) (kw) |
7.5 |
Cutting feed two-speed motor power of left feeding-box (AC) (KW) |
1.3/1.8 |
Fast motor power (KW) |
2.2 |
Power of main motor (AC) (KW) |
55 |
Weight of machine (t) |
34 |
Machine overall dimension (mm) |
5180*4560*4680 |
Power supply |
380V/50HZ/3PH |
Electrical components |
Schneider electrics |
PLC controller |
Mitsubishi |